Manuals / Fisher-Price / Baby / High Chair

Fisher-Price P9043 manual Assembly, Fit the front base into the frame tubes

Models: P9043

1 16

Download 16 pages 29.73 Kb

Page 5

Image 5

• Fit the front base into the frame tubes.

Assembly

Seat Support

Footrest

Front Base

• Fit the front base into the frame tubes.

•Insert two #8 x ¾" screws with retainers into the holes in each frame tube and tighten.

Hint: If you cannot insert the screws into the frame tubes, you have assembled the front base backwards. Remove it, turn it around and re-assemble it to the frame tubes.

•Lift the frame assembly upright.

•Fit the footrest onto the seat support, as shown.

Footrest

•Insert two #8 x ¾" screws into the holes on each side of the footrest and tighten.

Page 5

Image 5

Fisher-Price P9043 manual Assembly, Fit the front base into the frame tubes

Contents

P9043 Consumer Information When attached to adult chairPrevent serious injury or death from falls or sliding out Only use for a child capable of sitting upright unassistedFront Base Assembled PartsFootrest Rear Base Seat with RestraintThis package contains small parts AssemblyHint Push the seat support all the way to the top of the assembly You will hear several clicksFit the front base into the frame tubes AssemblyPush the seat back to “snap” in place AssemblyLarger Baby AssemblySmaller Baby Assembly Securing Your ChildWhen attached to adult chair Prevent serious injury or death from falls or sliding out4LOOSEN Securing Your Child3TIGHTEN Release Bar Using the TrayTray Armrest Attaching To An Adult Chair Adjusting the SeatTo adjust the seat height Prevent serious injury or death from falls or sliding outChair Attaching To An Adult ChairStraps DoorShoulder Straps Remove the Seat Back andAttaching To An Adult Chair Chair Attachment Straps Attaching the Seat To the FrameTo remove the pad StorageCare CANADA