Fisher-Price P9043 manual Assembly, Push the seat back to “snap” in place

Models: P9043

1 16

Page 6

Assembly

Tab

Slot

•At an angle, fit the tabs on the seat back into the slots in the seat.

•Pull on the seat back to be sure it is secure to the seat bottom.

• Unbuckle the lower restraint.

Pegs

Seat Pad

Elastic Straps

•Pull the waist restraint ends through the slots in the seat pad.

•Fit the elastic loops on the seat pad down through the slots in the seat.

•Turn the seat upside down.

•Pull the elastic straps through the slots in the seat and fit the elastic straps to the pegs.

•Pull the shoulder restraint ends through the slots in the seat pad.

•Fit the straps on the back of the seat back pad into the slots in the seat back.

Image 6

Contents

P9043 Prevent serious injury or death from falls or sliding out When attached to adult chairConsumer Information Only use for a child capable of sitting upright unassistedFootrest Assembled PartsFront Base Rear Base Seat with RestraintHint Push the seat support all the way to the top of the assembly AssemblyThis package contains small parts You will hear several clicksAssembly Fit the front base into the frame tubesAssembly Push the seat back to “snap” in placeAssembly Smaller BabyLarger Baby When attached to adult chair Securing Your ChildAssembly Prevent serious injury or death from falls or sliding outSecuring Your Child 3TIGHTEN4LOOSEN Using the Tray Tray ArmrestRelease Bar To adjust the seat height Adjusting the SeatAttaching To An Adult Chair Prevent serious injury or death from falls or sliding outStraps Attaching To An Adult ChairChair DoorRemove the Seat Back and Attaching To An Adult ChairShoulder Straps Attaching the Seat To the Frame Chair Attachment StrapsStorage CareTo remove the pad CANADA