Fisher-Price T4838 manual Problems & Solutions

Problems & Solutions
Problem	Solution
Transmitter range indicator	Receiver is out of range of transmitter. Move receiver closer to transmitter.
light flashes	Note: Range varies depending on surrounding conditions such as noise
	levels, physical obstructions and signal interference.
	Transmitter power is off. Turn transmitter power on.
	Channel switches are on different channels. Make sure channel switches
	on both transmitter and receiver are set to same channel.
	Loose power cord connection and transmitter power is off. Check transmitter
	power cord plug-to-outlet connection.
	No power to wall outlet and transmitter power is off. Make sure light
	switch that controls power flow to wall outlet is on.
	Power is off because circuit breaker for room is off. Make sure house
	fuses and circuit breakers are on.
Receiver power indicator	Receiver power is off. Turn receiver power on.
does not light
	Batteries in receiver are weak or dead. Replace all batteries with three
	“AAA” (LR03) alkaline batteries or use the AC adaptor as a power source.
	Power is off because circuit breaker for room is off. Make sure house
	fuses and circuit breakers are on.
	No power to wall outlet and power is off. Make sure light switch that
	controls power flow to wall outlet is on.
Receiver low battery indicator	Batteries in receiver are weak or dead. Replace all batteries with three
light flashes	“AAA” (LR03) alkaline batteries or use the AC adaptor as a power source.
Transmitter power L.E.D.	Transmitter power is off. Turn transmitter power on.
does not light at all
	Loose power cord connection and transmitter power is off. Check transmitter
	power cord plug-to-outlet connection.
	No power to wall outlet and transmitter power is off. Make sure light
	switch that controls power flow to wall outlet is on.
	Power is off because circuit breaker for baby’s room is off. Make sure
	house fuses and circuit breakers are on.
You can hear conversations or	There is signal interference due to other nursery monitors on same
sounds from other homes	channel or cordless telephone use. Change channel switches on both
	transmitter and receiver to eliminate source of interference.

Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor are damaged, please contact Fisher-Price®.

14