Testing Sound Reception
Power/Volume Dial
Sound Lights
Channel
Range Switch
Indicator
SIDE VIEW
•Place a receiver in the room where you intend to use it.
•Set the receiver(s) channel switch to the same channel as the transmitter.
•Turn the power/volume dial to turn the power ON. Wait a few seconds to see if you have a good signal. If the range indicator light blinks along with beeping, you are out of range. Move the receiver closer to the transmitter.
•When sound is picked up by a receiver, the sound lights turn on.
-One or two lights indicate quieter sounds.
-Three or more lights indicate louder sounds.
•If the range indicator begins fl ashing, you may be experiencing interference. Try selecting a different channel on both the receiver and transmitter. If the range indicator continues to fl ash, move the receiver closer to the transmitter.
10
