Assembly
Handlebar | Headlight | |
Cover | ||
|
Frame
Neck
Fork
Post
Fork Cover
Rear of Trike
9 |
•Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels.
•Place the handlebar onto the fork post and push it down onto the frame. Make sure the handlebar is positioned so that the screw hole faces the rear wheels and aligns with the screw hole in the fork post.
Hint: You may need to rotate the handlebar to align the holes.
•Insert the #8 x 3" (7,6 cm) screw through the hole in the handlebar and into the fork post so that part of the screw (about 3/4" - 1,9 cm) is still visible. Tighten the screw.
Cap
11
•Fit the the headlight cover onto the front of the handlebar.
•Insert three #6 x 1/2" (1,3 cm) screws into the headlight cover. Tighten the screws.
Seat Retainer
Seat
Peg
12
•Position the seat upside down.
•Fit the small pegs on the seat retainer into the holes in the seat.
10
• Insert and “snap” the cap into the hole in the frame.
5
