TROUBLESHOOTING

Before inquiring about service and maintenance, please check the following points listed below.

TROUBLECHECK POINT

POSSIBLE SOLUTION

 

 

 

Power won’t turn on even

Is the power cord plug

Insert power cord plug

when the on/off pedal

firmly plugged into the

firmly into the outlet.

switch is turned on.

outlet?

(See page 5)

 

 

 

 

Is the hose firmly attached

Make sure the hose is

 

to the main unit?

attached. (See page 7)

 

Has dirt clogged up the

Remove the clogged dirt.

 

hose?

Suction power

 

Did you check the "Max" fill

 

has weakened.

Empty the dust container.

line to see if the dust

 

(See page 8)

 

container is full?

 

 

 

Is dust and debris

Clean the filter.

 

clogging the filter?

(See pages 8-9)

 

 

 

 

Did you press the handle

Press the handle release

 

pedal and pull back on the

 

release pedal?

 

handle. (See page 6)

 

 

 

Has dirt clogged up the

Remove the clogged dirt.

The rotating brushes

rotating brushes?

(See page 9)

won’t turn.

If the rotating brushes still won't turn after checking the

 

above points and possible solutions, an internal drive

 

belt in the floor nozzle may be broken. Contact an

 

authorized service center for further evaluation.

 

(See page11)

 

 

 

 

Dirt and debris are flying

Have the filter and dust

Make sure they are

container been correctly

attached correctly.

out from the exhaust vent.

attached?

(See page 8-9)

 

SPECIFICATIONS

POWER SUPPLY

AC120V 60Hz

 

 

POWER CONSUMPTION

10 Amps

 

 

CAPACITY OF DUST CONTAINER

0.8 Gallon

 

 

DIMENSIONS (W x D x H)

13-3/8” x 15-3/4” x 43-11/16”

 

 

WEIGHT

14.3 lbs

POWER CORD LENGTH

25 ft

ACCESSORIES

Floor nozzle (1), Crevice Tool (1), Handle (1),

Brush (1), Wand (1)

 

 

 

10