EMPTYING THE DUST CONTAINER
Carefully empty out dirt and debris. Very fine dirt and dust particles may seal the filter and cause loss of suction, as well as damage to the motor.
•Always turn off the vacuum cleaner when emptying the dust container.
•Exceeding the “Max” fill line may cause dirt and debris to seal the filter and cause loss of suction.
•Empty the dust container before reaching the “Max” fill line and clean the filter often to prevent various types of dirt particles from sealing the filter.
•Since fine dust, powders and other types of small dirt particles can collect into the filter after carpet cleaning, suction may weaken. When this happens, please refer to the Maintenance section on page 9.
Press the dust container button to detach the dust container.
1 Push
Dust Container
Button
2 Detach
2. Remove the dust container cover.Detaching |
| Attaching |
|
| 2 Detach | 2 | Close |
|
|
| |
| DUST |
| SLOT |
| CONTAINER 1 | ||
| TAB | ||
| LEVER |
|
|
| 1 Push |
|
|
Push the dust container lever and remove. To attach, join the tab into the slot.
Detaching | Dust Container | |
1 Turn | ||
Cover |
2 Detach
Filter
Turn filter counterclockwise to remove. When filter is clogged with dirt and debris, remove the filter and wipe off debris with a tissue.
Attaching
1 Turn | Side view |
To reattach the filter, turn and align the convex tab on the filter to the 
(triangle mark) as shown in
the illustration.
Turn
Filter's Convex Tab
3.Empty the accumulated dirt and debris from the dust container.
8