DATE AND TIME SETTING
The camera will record the date and time an image or audio recording is taken so that you can display them during playback. Therefore, before capturing images, make sure the correct date and time are set.
Example: To set the clock to 7:30 p.m. on December 24, 2006
1 Turn on the camera (page 24), and press the MENU button.
hThe RECORDING MENU or PLAYBACK MENU appears.
2 Toggle the SET button to the left two times to display the OPTION MENU.
hThe OPTION MENU is canceled if the MENU button is pressed.
3 Select the clock set icon C, and press the SET button.
hThe Clock Set Screen appears. h The current date and time settings
are shown.
h Follow the procedures below to enable or disable the date display during playback, to set the display format for the date, and to set the date and time.
h To return to the OPTION MENU, press the MENU button.
1/3
CLOCK SET
INFO DISPLAY
OPERATION BEEP
POST VIEW
WIND NOISE REDUC.
NOISE REDUCTION
<OPTION MENU>
CLOCK SET
DATE | 2006/07/01 |
TIME | 00:00 |
DISP | Y / M / D |
|
|
| OK |
|
|
English 28