Fluke 433, 434 manual Introduction, Contacting a Service Center, Safety Information Read First

Introduction

This Getting Started manual provides basic information on the Fluke 433 and 434 Three Phase Power Quality Analyzers. Fluke 434 has additional features such as Interharmonics, Transients, Energy Usage, Inrush Currents, extra memory to store Screens and Data, FlukeView software, and an optical isolated interface cable.

For complete operating instructions, refer to the Users Manual on the accompanying CD-ROM.

Contacting a Service Center

To locate a Fluke authorized service center, visit us on the World Wide Web at: www.fluke.com or call Fluke using any of the following phone numbers:

+1-888-993-5853 in the U.S. and Canada +31-40-2675200 in Europe

+1-425-446-5500 from other countries.

Getting Started

Safety Information: Read First

The Fluke 433/434 Three Phase Power Quality Analyzer - hereafter referred to as “Analyzer” - complies with:

•ANSI/ISA S82.01-1994.

•EN/IEC61010-1 2nd edition 1000 V Measurement Category III, 600 V Measurement Cat IV, Pollution Degree 2.

•CAN/CSA-C22.2 No.61010-1-04 (including approval).

Use the Analyzer and its accessories only as specified in the Users Manual. Otherwise, the protection provided by the Analyzer and its accessories might be impaired.

A Warning identifies conditions and actions that pose hazard(s) to the user.

A Caution identifies conditions and actions that may damage the Analyzer.

1