![](/images/new-backgrounds/1236358/23635833x1.webp)
53 & 54 Series II
Measuring Temperatures
Changing the Line Frequency
For optimum rejection of line noise, set the thermometer for the local line frequency as follows:
1. Press Kor Nuntil the display shows Li ne. |
Measuring Temperatures
Connecting a Thermocouple
Thermocouples are color coded by type based on the North American ANSI Color Code:
2. | Press Eto indicate that you want to change the |
| line setting. |
3. | Press Kor Nas needed until the display shows |
| 50 V or 60 V (50 Hz or 60 Hz). |
4. | Press Eto store the line setting in memory. |
Type
J
K
T
E
Color
Black
Yellow
Blue
Purple
Type
R
S
N
Color
Green
Green
Orange
1.Plug a thermocouple into the input connector(s).
2.Set the thermometer for the correct thermocouple type.
To change the thermocouple type, see “Changing Setup Options.”
13