53 & 54 Series II
Using the Thermometer
Using the Thermometer
1.Plug the thermocouple(s) into the input connector(s).
2.Press Ato turn on the thermometer.
After 1 second the thermometer displays the first reading. If no thermocouple is plugged into the selected input or the thermocouple is "open," the display shows
"- - -
Changing Setup Options
Use Setup to change the logging interval, thermocouple type, offset, sleep mode, time, and line frequency settings.
The thermometer stores the settings in its memory. Setup settings reset only when the batteries are removed for more than 2 minutes.
Entering and Exiting Setup
When the thermometer is in Setup mode, the display shows s.
∙Press Dto start or exit Setup.
Notes
Press Kor Nto scroll to the setup option you want to change.
Setup is disabled in MIN MAX mode.
9
