Cable Restraint
J1
J2
J3
J4
1.Form a loop in the mains cable (J1).
2.Push the loop through the slot (J2).
3.To secure, position the loop over the hook (J3).
4.Pull the cable back through the slot (J4).
How to Use
K |
L |
M |
N |
WARNING
The use of eye protection is recommended. The use of ear protection is recommended. To prevent dust ir- ritation, the wearing of a
Using As A Blower
Blow Mode - The product will blow debris from pa- tios, paths, driveways, lawns, bushes, borders etc.
1.Point nozzle towards the ground.
2.To start press the switch to on (K).
3.Stand back from debris to be cleared.
4.Point the tube towards the debris and slowly approach (L).
6. To stop press the switch to off.
•If Blow performance is reduced, the blow outlet may be blocked. Switch off the product and dis- connect from the mains electricity supply. Re- move the Blow Tube and clear any blockage in the blow outlet using a blunt implement (M)
Using As A Vacuum
Vacuum Mode - In this position your product will pick up leaves, small twigs and garden debris.
1.Position the tube slightly above the debris, press the switch to on (K) and move the product slowly back and forth (N).
3.Do not force the tube into the debris as this will impair performance.
4.To stop press the switch to off.
•If Vacuum performance is reduced, the Debis Bag Adaptor may be blocked. Switch off the product and disconnect from the mains electricity supply. Remove the Debris Bag and clear any blockage in the Debris Bag Adaptor using a blunt implement (P)
P
