Flymo 2700XV manual F1 F3, Blow Tube & Shoulder Harness Assembly, Suction Tube Assembly

Models: 2700XV

1 8
Download 8 pages 43.05 Kb
Page 4
Image 4
Blow Tube & Shoulder Harness Assembly

Blow Tube & Shoulder Harness Assembly

A

B

C

Blow Tube Assembly

1.Attach the blow tube to the product as shown in Fig A, ensuring it clicks securely into position.

Shoulder Harness Assembly

1.Attach the Shoulder Harness to the product as illustrated in Fig B.

2.Adjust the Shoulder Harness as required to ensure it is in the most comfortable position. (C).

Suction Tube Assembly

D

Suction Tube Assembly

1. Attach the two Suction Tube halves together as illus- trated in Pic D. Ensure that the two halves click se- curely into position.

IMPORTANT

When the Suction Tube halves are attached together, this is a permanent fixture, they can not be disassem- bled.

Converting from Blower to Suction

E1

E2

E3

1.Turn the product over and press the release catch on the Blow Tube (E1).

2.Slide the catch away from the product (E2) and re- move the Blow Tube from the product (E3).

F1

F3

F2

3.Press the release catch on the Impeller Guard (F1).

4.Release the wire hook (F2).

5.Turn the Impeller Guard anti-clockwise until it can be removed (F3).

Page 4
Image 4
Flymo 2700XV manual F1 F3, Blow Tube & Shoulder Harness Assembly, Suction Tube Assembly, Converting from Blower to Suction