Flymo 3400 Removing, Emptying and Refitting the Grassbox, Cut Out Device, Starting and Stopping

Removing, Emptying and Refitting the Grassbox

J

K

grassbox empty

grassbox full

Grassbox Full

•As the grassbox fills up, grass will be visible through the window in the lid (J).

•When the window is full it is time to empty the grass- box.

Emptying the Grassbox

•Stop the lawnmower, as described in ‘To Stop your

Lawnmower’and wait until the blade has stopped rotating, BEFORE lifting the grassbox lid.

1.Release grassbox catch and lift grassbox lid (B). See Assembly Instructions.

2.Rest grassbox lid against lower handle and remove grassbox (K).

3.Empty grassbox.

4.Replace grassbox and close grassbox lid.

L

M

Cut Out Device

Cut out

•IMPORTANT

•The Roller Compact is fitted with a cut-out device

(L) which will prevent the lawnmower from being started until the grassbox lid is firmly close and clicked into place.

•Do not attempt to use your lawnmower without the grassbox in place or with the lid open.

IMPORTANT INFORMATION

When received from the Manufacturer, the front wheels are in a raised position.

Do not switch on this product before removing from the raised position into a desired height of cut. (M)

Starting and Stopping

NP

Q

RS

1

•Important:- Your lawnmower will not start until the grassbox lid is firmly closed and clicked into place.

To Start your Lawnmower

1.Connect female extension cable connector to the back of the switchbox. (N)

2.Form loop in mains cable and push the loop through the slot as illustrated in picture (P)

3.To secure, position loop over the hook and pull the cable back through the slot as illustrated in picture (Q).

4.Connect plug to mains and switch on.

5.Tilt the handle downwards to slightly raise the front of the lawnmower and to reduce the risk of lawn dam- age whilst starting.

The switchbox is provided with a lock-off button (R1) to prevent accidental starting.

6. Press and hold the lock-off button (R) on the switch- box, then squeeze one of the Start/Stop levers towards the upper handle (S).

7 . Continue to squeeze the start/stop lever towards the upper handle and release the lock-off button.

8.Lower the lawnmower to its proper operating position and commence mowing.

•NOTE: There are two start/stop levers fitted. Either one can be used for starting the lawnmower.

•IMPORTANT: Do not use the start/stop levers intermittently To Stop your Lawnmower

1. Release the pressure on the Start/Stop lever.