Guarantee & Guarantee Policy
If any part is found to be defective due to faulty manufacture within the guarantee period, Husqvarna Outdoor Products, through its Authorised Service Repairers will effect the repair or replacement to the customer free of charge providing:
(a)The fault is reported directly to the Authorised Repairer.
(b)Proof of purchase is provided.
(c)The fault is not caused by misuse, neglect or faulty adjust- ment by the user.
(d)The failure has not occurred through fair wear and tear.
(e)The machine has not been serviced or repaired, taken apart or tampered with by any person not authorised by Husqvarna Outdoor Products.
(f)The machine has not been used for hire.
(g)The machine is owned by the original purchaser.
(h)The machine has not been used commercially.
*This guarantee is additional to, and in no way diminishes the customers statutory rights.
Failures due to the following are not covered, therefore it is important that
you read the instructions contained in this Operator's Manual and under- stand how to operate and maintain your machine:
Failures not covered by guarantee
*Replacing worn or damaged blades
*Failures as a result of not reporting an initial fault.
*Failures as a result of sudden impact.
*Failures as a result of not using the product in accordance with the instruc- tions and recommendations contained in this Operator's Manual.
*Machines used for hire are not covered by this guarantee.
*The following items listed are considered as wearing parts and their life is dependent on regular maintenance and are, therefore not normally subject to a valid warranty claim: Blade, Electric Mains cable, Belt
*Caution!
Husqvarna Outdoor Products does not accept liability under the warran- ty for defects caused in whole or part, directly or indirectly by the fitting of replacement parts or additional parts that are not either manufactured or approved by Husqvarna Outdoor Products, or by the machine having been modified in any way.
EC Declaration of Conformity
I, the undersigned M. Bowden of Husqvarna Outdoor Products, Aycliffe Industrial Park, NEWTON AYCLIFFE, Co. Durham. DL5 6UP. Certify that the product:- Category........ Electric Wheeled Rotary
Make..............Husqvarna Outdoor Products
Conforms to the specifications of Directive 2000/14/EEC
I, the undersigned M. Bowden of Husqvarna Outdoor Products, Aycliffe Industrial Park, NEW- TON AYCLIFFE, Co. Durham. DL5 6UP Certify that a sample of the above product has been tested using directive 81/1051/EEC as a guide. The maximum
I, the undersigned M. Bowden of Husqvarna Outdoor Products, Aycliffe Industrial Park, NEWTON AYCLIFFE, Co. Durham. DL5 6UP Certify that a sample of the above product has been tested using ISO 5349 as a guide. The maximum weighted root mean square value of vibration recorded at opera- tor’s hand position was:-
|
|
|
|
|
|
|
|
|
|
....Type of Cutting Device | Rotary Blade |
|
| Type | RCV340 | RCV3400 RCV400/4000 |
| ||
Identification of Series | See Product Rating Label |
|
| Width of Cut | 34 cm | 34 cm | 40 cm |
| |
Conformity Assessment Procedure....ANNEX VI |
|
| Speed of Rotation of Cutting Device... | 3,800 RPM | 4,300 RPM | 4,350 RPM |
| ||
Notified Body................Intertek., Cleeve Road, Leatherhead, |
|
| Guaranteed sound power level | 96 dB (A) | 96 dB (A) | 90 dB (A) |
| ||
| Surrey. KT22 7SB England |
|
|
| |||||
|
|
| Measured Sound Power Level | 95 dB (A) | 95 dB (A) | 89 dB (A) |
| ||
Other |
|
|
| ||||||
|
| Level | 87.5 dB (A) | 87.5 dB (A) | 79.1 dB (A) |
| |||
& applicable |
|
|
| ||||||
|
| Value | 3.25 m/s2 | 3.25 m/s2 | 2.97 m/s2 |
| |||
|
|
| |||||||
|
| Weight | 13.5 kg | 13.5 kg | 11 kg |
| |||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
Newton Aycliffe, 08/02/06
M. Bowden,
Research & Development Director
Husqvarna Outdoor Products
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
ENGLAND
Telephone - (00) 44 870 609 1901 Fax - (00) 44 870 609 1902
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice. 
