7. | Do not pull cable around sharp objects. |
| other than grass. |
8. | Always switch off at the mains before disconnecting | 8. | Never operate the trimmer with damaged guards or |
| any plug, cable connector or extension cable. |
| without guards in place. |
9. | Never pull on the cable to disconnect any of the plugs. | 9. | Never fit metal cutting elements. |
10.Switch off, remove plug from mains and examine electric | 10.Keep hands and feet away from the cutting means at | ||
| supply cable for damage or ageing before winding cable |
| all times and especially when switching on the motor. |
| for storage. Do not repair a damaged cable, replace it with | 11.Never pick up or carry a trimmer by the cable. | |
| a new one. Use only Flymo replacement cable. | 12.Do not lean over the trimmer guard - objects may be | |
11.Always wind cable carefully, avoiding kinking. |
| thrown by the cutting line. | |
12.Never carry the product by the cable. | 13.Beware of | ||
13.Use only on AC mains supply voltage shown on the | 14.Remove the plug from the mains : | ||
| product rating label. | - | before leaving the trimmer unattended for any period; |
14.Our products are double insulated to EN60335. | - | before clearing a blockage; | |
| Under no circumstance should an earth be con- | - | before checking, cleaning or working on the appliance; |
| nected to any part of the trimmer. | - | if you hit an object. Do not use your trimmer until you are |
Preparation |
| sure that the entire trimmer is in a safe operating condition; | |
1. | While using your product always wear substantial | - | if the trimmer starts to vibrate abnormally. Check im- |
| footwear and long trousers. |
| mediately. Excessive vibration can cause injury. |
2. | Before using the machine and after any impact, check | Maintenance and storage | |
| for signs of wear or damage and repair as necessary. | 1. | Keep all nuts, bolts and screws tight to be sure the |
3. | Inspect the area to be cut before each use. Remove all objects |
| trimmer is in safe working condition. |
| such as stones, broken glass, nails, wire, string etc, which can | 2. | Replace worn or damaged parts for safety. |
| be thrown or become entangled in the trimmer head. | 3. | Only use the replacement cutting line specified for |
4. | Before use, inspect the area for wildlife, especially hedge- |
| this product. |
| hogs. | 4. | Only use replacement parts and accessories recom- |
5. | Check that the cutting head is fitted correctly. |
| mended by Husqvarna UK Ltd. |
Use | 5. | After any maintenance in dealing with the cutting line, | |
1. | Use the trimmer only in daylight or good artificial light. |
| always return the product to its normal operating posi- |
2. Avoid operating your trimmer in wet grass, where feasible. |
| tion before switching on. | |
3. | Take care in wet grass, you may lose your footing. | 6. | Clean unit with a dry cloth. Never use metal objects |
4. | On slopes, be extra careful of your footing and wear |
| to clean the unit. |
| 7. | Inspect and maintain the trimmer regularly. Any repairs | |
5. | Do not walk backwards when trimming, you could |
| must be carried out by an authorised repairer. |
| trip. Walk never run. | 8. | Store in a cool dry place and out of reach of children. |
6. | Keep cutting head below waist level. |
| Do not store outdoors. |
7. | Switch off before pushing the trimmer over surfaces |
|
|
Cables
IMPORTANT
Use only 1.00mm2 size cable up to 40 metres length maxi- mum.
Maximum rating:
1.00mm2 size cable, 10 amps 250 volts AC.
YOUR PRODUCT IS SUPPLIED WITH AN ELECTRIC MAINS CABLE WIRED DIRECTLY INTO THE PRODUCT.
1.Flymo Mains Cables and Extension Cables are avail- able from your local Approved Service Centre.
2.Do not wire an extension cable directly to your product your- self. Please contact your local Approved Service Centre for further information on the connectors and kits available.
3.Only use extension cables specifically designed for outdoor use.
CONNECTORS
Flymo connectors are suitable for use with 2 core cable only. Under no circumstances should these connectors be used for earthed products.
All Flymo connectors and cables are of splashproof con- struction. They are not waterproof and must not be left out- side permanently nor should they be submerged or immersed in water. Do not let cable lay or trail through pools of water or splashed with water from hose pipes.
MAINS PLUG REPLACEMENT
•If the plug supplied is cut off it should be de- stroyed. There is an electric shock hazard if a cut
off plug is inserted into a 13 amp socket.
1.No earth required. Flymo products are double insulated to EN60335 and under no circumstances should an earth be connected to any part of the product.
2.Ensure the mains voltage suits your product.
3.IMPORTANT!
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE The wire which is coloured BLUE must be connected to the Terminal which is marked with the letter ʻNʼ or coloured BLACK. The wire which is coloured BROWN must be connected to the Terminal which is marked with the letter ʻLʼ or coloured RED. 4.It is important that the outer sheath is clamped cor-
rectly into the
5.If in doubt consult your local Service Repairer or quali- fied electrician before the machine is used.
6.A 5 Amp fuse must be fitted to the Mains Plug. 7.The normal plug fuse and household fuse only protect
the electrical equipment and are not a safeguard against electrocution.
If your product is hard wired i.e.
Assembly Instructions
A1 |
CLICK! |
A2 |
CLICK! |
Assembly of Switch Handle to Tube (A1)
•Ensure that the internal cable is not twisted.
1.Insert the tube into the switch handle.
2.Push until it clicks into position.
•ENSURE THAT THE TUBE IS FULLY LOCATED BY ATTEMPTING TO REMOVE IT.
Assembly of Trimmer Head to Tube (A2)
•Ensure that the internal cable is not twisted.
1.Insert the tube into the trimmer head.
2.Push until it clicks into position.
•ENSURE THAT THE TUBE IS FULLY LOCATED BY ATTEMPTING TO REMOVE IT.
