Flymo Minimo manual Fault Finding Hints, Service Recommendations, Environmental Information

Models: Minimo

1 8
Download 8 pages 63.66 Kb
Page 7
Image 7
Fault Finding Hints

Fault Finding Hints

Fails to Operate

1Is the Power Turned On?

2Check the fuse in the plug, if blown replace.

3Fuse continues to blow?

Immediately disconnect from the mains elec- tricity supply and consult your local approved Service Centre.

Poor Flotation

1.Disconnect from the mains electricity supply.

2.Clean the underside of the hood and the fan blades.

3.Raise to a higher height of cut. See Adjusting the Cutting Height.

4.If poor flotation persists?

Disconnect from the mains electricity supply and consult your local approved Service Centre.

Excessive Vibration

1.Disconnect from the mains electricity supply.

2.Replace broken or missing plastic cutters.

3.Check plastic cutters and cutting head are fitted correctly and securely located.

4.If vibration persists?

Immediately disconnect from the mains elec- tricity supply and consult your local approved Service Centre.

Service Recommendations

1.We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.

2.Always use genuine Flymo Spare Parts.

3.Prepacked spares are available from most Electrolux Outdoor Products stockists.

4.Your product is uniquely identified by a silver and black product rating label.

5.If you have a problem with your machine contact your local Approved Service Centre ensuring you have full details of your product as described on the product rating label.

6.Should it be necessary for work to be carried out by your Service Centre, it is important to take your complete machine including cable and any extension cables used.

A network of specialist dealers can be found in your local Yellow Pages. To obtain service on your Flymo product simply telephone or visit your local Service Centre. Should you require service under the terms of our guarantee the Service Centre will require proof of purchase.

All of the centres listed stock genuine Flymo Spare Parts. NOTE: Our Service Repairers act on their own behalf and are not empowered to commit or legally bind Electrolux Outdoor Products in any manner whatsoever.

Environmental Information

Electrolux Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to com- pany procedures, and with the potential for recycling at the end of the products’ life.

Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.

Awareness of the environment must be considered when disposing of ‘end-of-life’ product.

If necessary, contact your local authority for disposal information.

The symbol on the product or on its packaging indicates that this product may not be treated as house- hold waste. Instead it shall be handed over to the appli- cable collection point for the recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could other- wise be caused by inappropriate waste handling of this product.

For more detailed information about recycling of this product, please contact your local council office, your household waste disposal service or the shop where you purchased the product.

Page 7
Image 7
Flymo Minimo manual Fault Finding Hints, Service Recommendations, Environmental Information