8
H
J
USE
K
Replacing the Cutting Line
Insert one end of the cutting line into the centre of the cutting head and push until the end of the line comes out at one end of the slot.
(Fig. H)
Secure the centre piece of the cutting line into the centre of the cutting head and guide the other side of the cutting line along the slot until it is securely located as illustrated in Fig. J.
Storing the spare cutting lines.
Cutting lines can be stored in the storage facility provided in the back of the trimmer stem. To store your line, insert one end of the line into the top slot and one end of the line into the bottom slot. Then take the centre pip and insert it into the hole in the middle slot and slide over to the left as illustrated in Fig. K.
