INSTALLATION

Continued

3.Using screws provided, fasten upper flange of blower bracket to hearth pan and end flanges to leg stands (see Figure 16, page 15).

Note: The wire assembly must be ar- ranged in front of and away from fan blades to reach power receptacle plug.

4.Remove 2 connectors from ON/OFF rocker switch located on wiring harness

(see Figure 17).

12.Replace all panels and/or brick bottom panel if previously removed.

110/115

 

ON/OFF

 

 

 

 

 

Panel Switch

 

 

 

 

 

V.A.C.

 

 

 

 

 

 

Black

 

 

 

 

 

 

Hot

 

 

 

 

 

 

 

Blower

Blower

Blower

 

 

 

 

Nuetral

 

Motor

Motor

Motor

Black

No. 1

No. 2

No. 3

Figure 18 - BK3 Wiring Diagram

5.Insert rocker switch into lower lover panel with switch lever pointing outward.

6.Reconnect previously removed wire con- nectors onto switch terminals.

7.Check to make sure power cord is com- pletely clear of blower and that there are no foreign objects in blower. Also, double check all wire leads and make sure wire routing is not pinched or in a precarious position. Correct accordingly.

8.Turn on power to duplex outlet if previ- ously turned off per warning in column 1, page 14.

9.Plug in blower power cord to duplex outlet

(see Figure 12, page 14).

10.Using ON/OFF rocker switch to turn blower on and check for operation. Turn blower off before continuing.

11.Peel off backing paper and stick supplied wiring diagram decal on firebox bottom approximately 12" in from of blower (see

Figure 18).

Hard-wiring Firebox

NOTICE: A qualified electrician mustconnectelectricalwiringto duplex outlet for built-in instal- lation. Follow all local codes. In absence of local codes follow TheNationalElectricCodeANSI/ NFPA 70.

The “Handy Box” with duplex outlet is provided in the firebox located in the lower right base area.

1.Remove screw holding duplex outlet cover to handy box. Remove duplex outlet.

2.Route electrical cable through strain relief and handy box (see Figure 19).

3.Connect electrical cable to duplex outlet.

Match wire colors to those on duplex out- let. Be sure to connect the ground wire.

4.Place duplex outlet back into handy box and secure with screws. Replace outlet cover.

Switch

 

Terminals

Duplex Box/

 

ON/OFF Handy Box

Rocker

 

Switch

 

Strain Relief

Figure 19 - Hard-Wiring Firebox

Wire Harness

Connectors

Figure 17 - Connecting Rocker Switch

16

www.fmiproducts.com

108662-01L