QS.325_345_v3 5/24/04 11:01 AM Page 3
FoodSaver Accessories
Accessories include FoodSaver Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers.
FoodSaver Accessory Guidelines
1.Always leave at least one inch of space between contents and rim.
2.Wipe rim of canister, container or bottle to ensure it is clean and dry.
3.Place lid on canister or container, or place stopper in bottle.
4.For accessories with a large knob on lid, turn knob to Vacuum. Vacuum package using instructions below. When vacuum process is complete, turn knob to Closed before removing Accessory Hose.
5.For accessories without a large knob on lid, vacuum package using instructions below.
1. | Prepare container according to FoodSaver | 5. Gently twist and remove Accessory Hose from | ||
| Accessory Guidelines above. | accessory and appliance. |
| |
2. | Insert one end of Accessory Hose (D) into | 6. To test vacuum, simply tug on accessory lid. It | ||
| Accessory Port (A) on appliance. Insert other end | should not move. |
| |
| into port on accessory. Twist gray tab while | Tip: If appliance lid is locked, press Open/Cancel | ||
| inserting to ensure a tight fit. | |||
| Button (B) to open lid. | Accessories | ||
3. | To begin vacuum process, press down firmly | |||
| ||||
| on lid and hold. Motor will turn on as vacuum |
| ||
| Note: For important tips on using accessories with | |||
| process begins. | different foods, please refer to the FoodSaver |
| |
4. | When motor turns off, release lid. Vacuum process | Reference Guide. |
|
is complete.
How to Open FoodSaver Accessories after Vacuum Packaging
IMPORTANT: Do NOT use screw bands when vacuum packaging jars. To open, wedge spoon between Mason jar lid and highest part of threaded rim. Twist spoon gently to release vacuum.
To release vacuum and open, simply twist and pull up on Bottle Stopper.