Guide.Pro Sport_w/o seal_v3 7/23/03 10:45 AM Page 14
T H E F O O D S AV E R U S E R M A N U A L
How to Use the Cancel Button
Use the Cancel Button if you want to terminate the vacuum process before it is complete. This feature will cancel the vacuum process without sealing the bag. Use this feature if your fragile food is becoming crushed or if you feel you no longer want to vacuum package your item.
1At any time after you have pressed on the lid you can cancel the vacuum process simply by pressing and holding the Cancel Button. This will cancel the vacuum process completely.
2The green light will turn off and the process will stop.
3Open the lid and remove the unsealed bag.
How to Use the Removable Vacuum Channel
The Vacuum Channel in the Pro Sport, GameSaver and Vac 1500 is fully removable for easy cleaning.
1Open the lid of the appliance.
2Open the sliding door on the right side of the appliance.
3Pull out the Removable Vacuum Channel.
4Remove gasket from the Vacuum Channel.
NOTE: Vacuum Channel (but not the rubber gasket) is dishwasher safe in top rack only.
5When Vacuum Channel is fully dry, the rubber gasket can be
6Insert Vacuum Channel into the appliance.
7Close sliding door.
T H E F O O D S AV E R U S E R M A N U A L
How to Vacuum Package Using FoodSaver
Designer Canisters
FoodSaver Designer Canisters are an excellent way to store delicate items in the refrigerator, pantry or on the countertop.
1Set the Sealing Adjustment Switch to the “Accessory” position.
2Place the item(s) to be vacuum packaged inside the canister. Leave at least one inch between the contents and the rim of the canister.
3Place the lid on top of the canister.
4Insert one end of the Accessory Hose into the Accessory Port on the appliance. Insert the other end of the Accessory Hose into the hole on the top of the canister lid. Twist the gray hose fitting while inserting to ensure a tight fit.
5Vacuum package as per instructions on page 11, steps 6 and 7.
6Remove the Accessory Hose from
the lid by gently twisting the gray hose fitting and pulling up.
IMPORTANT: Remember to remove the Accessory Hose from the Accessory Port on the appliance before you vacuum package in FoodSaver Bags. Remove the hose by gently twisting the gray fitting while pulling it out. Never yank or tug the hose as this may damage both the hose and the fitting.
How to Open FoodSaver Designer Canisters
To open a FoodSaver Designer Canister, press and hold the gray rubber button in the center of the lid. This will release the vacuum and allow the lid to be removed.
14 | 15 |
