9
C3493pr-0922
Intheunassembledstate,thispackagecontains
smallparts.Adultassemblyisrequired.
BATTERY CHARGING
Battery
Connector
Charger
Connector
A
B
•Plugthebatteryconnectorintothechargerconnector
A
.
Pushfirmlytomakesuretheconnectorsarecompletelyjoined.
•Plugthechargerintoastandardwalloutlet
B
.
Notes:
- Use the charger only in a wall outlet. Do not plug into
a ceiling outlet.
-Ifpowerflowtothewalloutletiscontrolledby��aswitch,
make sure the switch is “ON”.
- The power indicator on the charger does not indicate the
charge status of your battery. The power indicator allows you
to see there is power from the wall outlet.
•Beforefirst-timeuse,chargethebatteryfor at least 18 hours.
Neverchargethebatterylongerthan30hours.
•Rechargethebatteryforatleast14hoursaftereachuseofyour
vehicle.Donotchargethebatterylongerthan30hours.
•Oncethebatteryischarged,disconnectthebatteryconnector
from the charger connector. Unplug the charger from the wall
outlet. The battery is now ready to be installed in your vehicle.
PleaseseetheBatteryInstallationsectiononpage19fordetailed
instructions on installing your battery. If your battery is already
installedinyourvehicle,simplyre-connectthemotorharness
connector to the battery connector.
WARNING
Childrencanbeharmedbysmallparts,
sharpedgesandsharppointsinthe
vehicle'sunassembledstate,orbyelectrical
items.Careshouldbetakeninunpacking
andassemblyofthevehicle.Childrenshould
nothandleparts,includingthebattery,
orhelpinassemblyofthevehicle.
ASSEMBLY
•Fita3/8"-16hexnutontooneendoftherearaxle.Handtighten
the hex nut to hold in place.
Rear Axle
1
INCORRECT
GAP
CORRECT
NO GAP
Power
Indicator
3/8" -16 Hex Nut
2
•Slideahubcap,peg side up, onto the rear axle.
•Slideawheel,ribs up, onto the rear axle.
•Slidearearwheeldriver,ring side down, onto the rear axle.
Rear Wheel Driver
(Ring Side Down)
Wheel
(Ribs Up)
Hubcap
(Peg Side Up)
Rear Axle