Main Menu
Make sure that you have properly installed and connected the cables of the receiver well. If the receiver is the factory status or there is no program list, when power on, the Main Menu window will be displayed on the screen.
During the normal TV/Radio mode, press MENU key on the RCU to enter into the Main Menu window.
This menu consists of 4 major main menus as follow.
-Channel
-Satellite
-System
-Tools
During the installation the OK key confirms a selection and LIST key shows Down List
Box if the column has 
mark. You can also use the numeric keys on the RCU to enter numeric value.
Use the PR+, PR- key to move upwards and downwards from one line to another line
and use 
key to move from main menu to sub menu and move from left side to right side or versa.
Meantime, you want to escape the menu system, please press MENU or EXIT key on the RCU.
If there is no program, you can not exit from the Main Menu window by pressing MENU or EXIT key. System will inform "No channel" and the following items turn grey.
1. Channel
1)Press menu key on the RCU to enter Channel list. 2)Press PR+, PR- keys to move the cursor up or down.
3)Press 
key to move the focus to the left menu.
1.1 TV Channel
1)Press SAT key, then press 
keys to select satellite.
2)Press PR+, PR- keys to select the program that you want to play, and then press OK key to view it in the small window.
