2.2 Satellite List
1.Press PR+, PR- keys to select the satellite up or down. Press OK key to select and mark, and you can press OK key again to cancel the selection and the mark.
2.If there is no satellite, the red colour and blue colour keys will be invalid.
3.Press red colour key to pop up the Edit Satellite
window. Press | PR+, PR- | keys to move cursor up or |
| |||
down. |
|
|
|
|
|
|
Name: User numeric keys | to change the name of |
| ||||
the satellite, please | refer to the Edit Channel Name. |
| ||||
Longitude: Y | ou can press | keys to switch | between east longitude and west | |||
longitude. After pressing | OK key, you can use | numeric keys to | edit the longitude, | |||
press EXIT | key | or the |
| PR+, PR- keys to exit editing mode. | The range of the | |
longitude is from 1to 180 degree. If beyond this range, system will | inform you "out of | |||||
range" when you press yellow colour key on the RCU. |
| |||||
After setting, press | yellow | colour key to save and exit, while press blue colour key | ||||
to exit without saving.
4.Press green colour key to pop up the Add Satellite window. Since the same operation as the above Edit Satellite window, here we don't explain any more.
5.Press blue colour key to pop up the dialogue "Are you sure to delete?". Select Yes button and press OK key to delete the selected satellite. You can cancel this operation by pressing OK key at the NO button.
