![](/images/new-backgrounds/1202682/20268217x1.webp)
|
|
|
Introduction | Further Reading |
•AMC modules – Describes how to install and configure Advanced Mezzanine Cards for use in the FortiGate unit.
•FortiGate Firmware – Describes how to install, update, restore and test firmware for the FortiGate device.
Document conventions
The following document conventions are used in this guide:
•In the examples, private IP addresses are used for both private and public IP addresses.
•Notes and Cautions are used to provide important information:
Note: Highlights useful additional information.
Caution: Warns you about commands or procedures that could have unexpected or ! undesirable results including loss of data or damage to equipment.
Typographic conventions
FortiGate documentation uses the following typographical conventions:
Convention | Example |
|
|
Keyboard input | In the Gateway Name field, type a name for the remote VPN |
| peer or client (for example, Central_Office_1). |
Code examples | config sys global |
| set |
| end |
CLI command syntax | config firewall policy |
| edit id_integer |
| set http_retry_count <retry_integer> |
| set natip <address_ipv4mask> |
| end |
Document names | FortiGate Administration Guide |
|
|
Menu commands | Go to VPN > IPSEC > Phase 1 and select Create New. |
|
|
Program output | Welcome! |
Variables | <address_ipv4> |
Further Reading
The most
The following FortiGate product documentation is available:
•FortiGate QuickStart Guide
Provides basic information about connecting and installing a FortiGate unit.
| |
9 |