Installing firmware from a system reboot using the CLI

FortiGate Firmware

4Make sure the FortiGate unit can connect to the TFTP server.

You can use the following command to ping the computer running the TFTP server. For example, if the TFTP server’s IP address is 192.168.1.168:

execute ping 192.168.1.168

5Enter the following command to copy the firmware image from the TFTP server to the FortiGate unit:

execute restore image <name_str> <tftp_ipv4>

Where <name_str> the IP address of the imagev28.out and

is the name of the firmware image file and <tftp_ip4> is TFTP server. For example, if the firmware image file name is the IP address of the TFTP server is 192.168.1.168, enter:

execute restore image image28.out 192.168.1.168

The ForitGate unit responds with this message:

This operation will replace the current firmware version!

Do you want to continue? (y/n)

6Type y.

The FortiGate unit uploads the firmware image file. After the file uploads, a message similar to the following appears:

Get image from tftp server OK. Check image OK.

This operation will downgrade the current firmware version! Do you want to continue? (y/n)

7Type y.

The FortiGate unit reverts to the old firmware version, resets the configuration to factory defaults, and restarts. This process takes a few minutes.

8Reconnect to the CLI.

9To restore your previous configuration, if needed, use the command:

execute restore config <name_str> <tftp_ip4>

10Update antivirus and attack definitions using the command: execute update-now.

Installing firmware from a system reboot using the CLI

This procedure installs a firmware image and resets the FortiGate unit to default settings. You can use this procedure to upgrade to a new firmware version, revert to an older firmware version, or re-install the current firmware.

To use this procedure, you must connect to the CLI using the FortiGate console port and a RJ-45 to DB-9, or null modem cable.

This procedure reverts the FortiGate unit to its factory default configuration.

For this procedure you install a TFTP server that you can connect to from the FortiGate internal interface. The TFTP server should be on the same subnet as the internal interface.

Before beginning this procedure, it is recommended that you back up the FortiGate unit configuration.

 

FortiGate-800 and FortiGate-800F FortiOS 3.0 MR6 Install Guide

42

01-30006-0455-20080910

Page 42
Image 42
Fortinet 800/800F manual Installing firmware from a system reboot using the CLI, Execute restore image namestr tftpipv4

800/800F specifications

Fortinet has established itself as a leader in cybersecurity solutions, and the FortiGate 800/800F series is a testament to this reputation. These next-generation firewalls are designed to deliver high-performance security for enterprise-level networks, providing a robust defense against a multitude of cyber threats.

One of the standout features of the FortiGate 800/800F is its advanced security processing unit (SPU) architecture, which ensures unparalleled threat detection and prevention capabilities. The inclusion of purpose-built chips allows for deep packet inspection at high speeds without hindering network performance. This architecture enables organizations to maintain high throughput while applying comprehensive security policies.

The FortiGate 800/800F series supports a wide array of security features, including intrusion prevention system (IPS), web filtering, and antivirus capabilities. These functionalities work together to monitor and protect against a range of cyber threats, from malware to sophisticated DDoS attacks. Additionally, the firewalls are equipped with FortiSandbox integration, providing automated malware analysis and ensuring that zero-day threats are effectively identified and neutralized in real-time.

In terms of networking capabilities, the FortiGate firewalls support advanced routing protocols, enabling seamless integration into existing network infrastructures. The series also includes support for VPN functionalities, which are crucial for secure remote access. With features like SSL inspection and secure SD-WAN, businesses can leverage flexible connectivity options while ensuring that sensitive data remains protected.

The FortiOS operating system enhances the FortiGate 800/800F series with centralized management capabilities, allowing administrators to configure and monitor security policies with ease. The intuitive user interface simplifies complex tasks, aiding in the rapid deployment and scalability of security measures across large networks.

High availability and redundancy features are also integral to the FortiGate 800/800F design. The series supports active-active and active-passive configurations, ensuring continuous protection and minimizing downtime during maintenance or unexpected failures.

In summary, the FortiGate 800/800F series stands out for its powerful performance, advanced security features, and robust networking capabilities. Organizations seeking to bolster their cybersecurity posture will find these firewalls to be invaluable tools in safeguarding their digital environments and ensuring business continuity in an increasingly complex threat landscape.