Foster 18 7167-042 manual Maintenance Instructions, Cleaning safety, Cleaning the oven surface

MAINTENANCE INSTRUCTIONS

Cleaning the oven

Cleaning safety

Turn the oven off and wait until all the heating elements have cooled down before touching or cleaning them. Clean the appliance with care.

Cleaning the oven surface

Clean using a damp cloth wetted with non-abrasive detergent then wipe with a soft dry cloth. Stainless steel surfaces with crusty residues must only be cleaned using a plastic scraper or sponge wetted with vinegar and warm water.

WARNING: do not use steam-cleaners for cleaning any part of the oven.

Oven door

Follow the instructions below for removing and reinserting the oven door.

Removing the oven door

Open the oven door fully. Lift the hinge hook and shift it into the indentation on both hinges. This will prevent the hinges from closing suddenly while removing the door. Grip the door by the sides towards the hinge area. Raise the door by a few centimetres (the spring will offer some resistance due to the locked hinge). Once the door has been sufficiently raised, the hinges can be dislodged from their housings. Remove the hinges from the openings on the door frame.

Lower the hinge hook after inserting the door

Lift the hinge hook and shift it	Hinge hook
into the locking indentation to remove
the oven door

Reinserting the oven door

Grip the door by the sides towards the hinge area and insert the hinges into the openings of the oven's front frame. Disengage the locking hooks while keeping the door fully open.

30