INSTRUCTIONS FOR INSTALLATION OF THE UNIT
All tasks involved in installing the appliance must be carried out by a skilled professional. Any work is to be performed with the appliance unplugged.
Electrical connection:
make sure that the voltage corresponds to that indicated on the lable on the side. The oven must be connected using a cable with a minimum
Attention: earth connection is required by law.
The manufacturer will in no way be held liable if accident prevention standards area not observed.
Insertion into the furniture unit:
The appliance can be inserted either under a worktop or into a column. In either case comply with the dimensions shown in figures 1 and 2.
For column installation, in order to ensure proper ventilation, it is very important to provide an opening of at least
The oven is secured to the furniture unit by four screws 
A
located in the holes of the perimeter frame (see fig. 1).
Do not use the door as a lever when installing the oven.
Do not place excessive pressure on the oven door when it is open.
Before using the oven for the first time
After unpacking the oven, installing it in the furniture unit and removing the accessories (drip pan and racks), it is advisable to run it at the highest temperature for about 20 minutes to remove any oily residues left from the manufacturing process which may cause unpleasant odours during cooking. Aerate the room while doing this. Wash the drip pan and racks with washing up liquid.
For the first few minutes that the oven is in operation, condensation may form on the front. This does not in any way compromise operation of the unit.
24
