NX-6A (Powered Near Field Studio Monitor)
Enclosure positioning
Adopting the time alignment construction, as well as mounting the woofer and tweeter closely, the NX-6A pro- vides a wide monitoring area.
We recommend to install the NX-6As vertically, as shown below, not only from the point of view of audio phase characteristics but also from the point of view of radiation of the built-in power amplifier. As a human ear is sensitive in the left-right direction, setting the unit horizontally is undesirable from the point of view of phase characteristics.
Vertical positioning
Horizontal positioning
• Optimal listening point and setting
To get the best of the NX-6A performance, set them at the appropriate height so that the middle point between the center positions of the tweeter and woofer matches the listener’s ear height.
Then, orient them 15 to 30 degrees inward to form a triangle as shown in the Figure below. The vertex of the equilateral triangle in the Figure is best listening position.
Center of the tweeter
Center of the woofer
15 to 30 degrees inward | 15 to 30 degrees inward |
Mid-point of the woofer and tweeter
Listener
Maintenance precautions
Be careful when cleaning speaker/enclosure surfaces!!
*No protecting grilles or covers are provided with NX-6A. Brush off dust attached to surfaces of speakers with soft dusters. Avoid direct fingers or damp dust cloth contact with diaphragms.
*Stained enclosure surfaces must be wiped with tightly wrung-out soft cloth after immersion in a diluted detergent. Under no circumstances must organic solvents such as paint thinner be used.
