Setup Instructions, Back Panel Overview

Setup Instructions continued

Once the studio monitors have been placed in their final location, it is time to proceed to connecting your PM0.4 studio monitors to the mixing console or digital workstation. Connection to the PM0.4 can be

made using RCA or TRS connectors. The gain control on the back of the monitor allows continuously variable adjustments to match most input types of line level signals (-10dBV for RCA un-balanced).

The TRS input is balanced and is also compatible with unbalanced sources, although this may require an adapter. The connection of the PM0.4 to the console/digital workstation should be done in the following order.

Note: Please do not plug both RCA and TRS connectors at the same time.

The PM0.4 is designed to take only one input.

Step 1: Make sure that all equipment has been powered down.

Step 2: Confirm that all gain controls, on the monitor and the source, are set to the minimum setting.

Step 3: Connect the source to the PM0.4 monitor.

Step 4: Power up the all source equipment and then turn on the PM0.4 last.

Step 5: Set the gain of both monitors at medium setting and slowly bring up the gain of the console.

Step 6: Adjust the gain of both monitors for balance and for best signal to noise ratio

Once the above steps have been completed, you are ready to use your PM0.4 monitors. It is recommended that you now play some familiar audio material and make any final adjustments, as far as placement or level, to get the optimum performance in your monitoring environment.

Back Panel Overview

1. Line (RSA) and TRS Input

The TRS is an electronically balanced input and the line input is unbalanced input. They are compatible with general line level input signals.

2. Continuously variable gain control

This control adjusts the input level to the internal amplifiers.

3. Heatsink

The heatsink dissipates heat from the amplifier. It

1 2

LineTRS

INPUT

MIN VOL. MAX

CAUTION:HEATSINK MAY GET HOT

is important the heatsink receives proper ventilation and is not placed near any sources of heat.

4. Power Switch

Turns power to the amplifier section on or off. On - position is the spot side.

5. AC Power Cord

This line cord provides the AC power to the product. Damage to equioment may occur if improper line voltage is used. (See voltage marking on label)

CAUTON

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS: RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

PM0.4

WARNING:To reduce the risk of fire or electrical

Shock, do not expose this equipment to rain or Moisture. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified personnel.

POWER4

AC IN

	R
TE TE
IN		R

MODEL PM0.4			CM	CONFORMS TO
PROFESSIONAL STUDIO MONITOR				CONFORMS TO
FOSTEX CO.	C	LISTED	US	UL STD.6500
120 VAC, 40 W, 60Hz	C	LISTED	US	CERTIFIED TO
SERIAL NO.02 * * * * *		3024002		CAN/CSA STD.E60065
SERIAL NO.02 * * * * *		3024002	Made in China
MADE IN CHINA			Made in China

p-5

PM0.4 specifications

The Fostex PM0.4 is a highly regarded studio monitor that has been designed specifically for audio professionals and enthusiasts who demand accurate sound reproduction. Renowned for its compact size and excellent performance, the PM0.4 is an ideal choice for home studios, small recording spaces, and multimedia production environments.

One of the primary features of the PM0.4 is its bi-amped design, which utilizes a dedicated amplifier for both the woofer and the tweeter. This configuration allows for enhanced clarity and detail across the frequency spectrum, ensuring that every element of the audio mix is heard accurately. The woofer measures 4 inches and is constructed from polypropylene, providing a solid low-end response with minimal distortion. The 1-inch soft dome tweeter complements the low frequencies with smooth high frequencies, making the monitor capable of reproducing a frequency range from 60 Hz to 30 kHz.

In addition to its impressive frequency response, the PM0.4 incorporates advanced technologies to manage sound dispersion and reduce unwanted reflections. The monitor features a front-ported design, which allows for flexible placement in varied environments. This design helps to enhance the low-frequency response while minimizing boundary coupling effects that can occur in close proximity to walls. This makes the PM0.4 versatile and adaptable to any studio setup.

Another notable characteristic of the PM0.4 is its adjustable acoustic controls. The rear panel of the monitor features switches for tailoring the sound to suit the environment, including options for low-frequency roll-off and high-frequency adjustment. This flexibility enables users to optimize the monitors for their unique space, resulting in a more accurate audio experience.

The build quality of the PM0.4 is significant, as it features a robust MDF cabinet that helps to minimize resonance and provide a clean monitoring experience. The monitor is finished in a sleek black vinyl, ensuring both aesthetics and durability.

In conclusion, the Fostex PM0.4 offers an impressive combination of features and technologies tailored to audio professionals. With its bi-amped configuration, front-ported design, adjustable acoustic controls, and solid build, it is an ideal choice for anyone seeking reliable and accurate sound monitoring in a compact form factor.

Fostex PM0.4 specifications Setup Instructions, Back Panel Overview

Models: PM0.4