Franke Consumer Products FNE 905 XS ECS Flue assembly, Electrical Connection, Upper exhaust flue

ELECTRICAL CONNECTION

•Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm.

•Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan.

Flue assembly

Upper exhaust flue

•Slightly widen the two sides of the upper flue and hook them behind the brackets 7.2.1, making sure that they are well seated.

•Secure the sides to the brackets by using the 4 screws 12c (2,9 x 9,5) supplied.

•Make sure that the outlet of the extensions pieces is aligned with the chimney outlets.

Lower exhaust flue

• Slightly widen the two sides of the flue and hook them be- tween the upper flue and the wall, making sure that they are well seated.

•Fix the lower part laterally to the hood body by using the 2 screws 12c (2,9 x 9,5) supplied.

2.1

2

2.2

7.2.1

12c

12c

EN	7
	7