Using a Password
You can protect the information stored on your device with a password. Caution: Setting the password or resetting the password will erase all memory stored on your device. It is recommended that you write down all information stored in memory before setting or resetting your password so that this information can be
To create a password:
1.Remove the calculator from its wallet and turn it over.
2.With a ballpoint pen or straightened paper clip, press the small RESET button on the back of your calculator.
3.Turn the calculator around and use the number keys to enter a 4
digit password, then press | . |
4.A picture of a key will appear in the display.
This shows that your password number is in the calculator’s memory.
Once you have created a password, you must enter the 4 digit secret number and press the password key before using any memory functions.
Note: If you forget your password, press the small RESET button on back of calculator. This erases the old password number and allows you to enter a new number.
IMPORTANT NOTE: Remember that setting or resetting your password erases all information stored in the memory of this device.
This unit may change operating modes, lose information stored in memory, or fail to respond due to electrostatic discharge or electrical fast transients. Normal operation of this unit may be re- established by pressing the reset key, by pressing ON/OFF, or by removing and replacing the batteries.
13
