Sending Words Between Books Resetting BOOKMAN

This BOOKMAN dictionary can send words to and receive words from certain other BOOKMAN books.

To send a word, you must first install a book card in your BOOKMAN, and that book card must be able to send or receive words. To learn if a book card can send or receive words, read its User’s Guide.

1. Highlight a word in this book.

If the BOOKMAN keyboard fails to re- spond, or if its screen performs errati- cally, first press CLEAR and then press AN/AUS twice. If nothing happens, follow the steps below to reset it.

Warning: Pressing the reset button with more than very light pressure may permanently disable your BOOKMAN. In addition, resetting BOOKMAN erases settings and information entered into its built-inbook,andinaninstalledbookcard.

1. Hold CLEAR and press AN/AUS .
See “Highlighting Words” in this User’s Guide.2.Hold ✩ and press KARTE .3.Highlight the other book.

4.Press EINGABE .

The other book may automatically enter your word. However, if your word stops at the initial screen of the receiving book, simply press EINGABE to look it up.

If nothing happens, try Step 2.2.Use a paperclip to gently press BOOKMAN’s reset button.

The reset button is recessed in a pin- sized hole on the back of BOOK- MAN. Look for it on the battery cover or near the book card slot.

➤Troubleshooting BOOKMAN•Make sure your book card, if any, is installed correctly.

•Check that the book card’s metal contacts are dirt-and dust-

31free.