Installing Batteries

 

Installing Book Cards

 

 

 

BOOKMAN model 440 uses two CR2032 lithium batteries. Here is how to install or replace them.

Warning: When the batteries lose power or are removed from BOOK- MAN, information that you entered in its built-in book, and in an installed book card, will be erased.

1.Turn BOOKMAN over.2.Slide off its battery cover in the direction of the triangle.3.Install the batteries with their plus signs facing you.4.Replace the battery cover.➤Resuming Where You Left Off

Warning: Never install or remove a book card when BOOKMAN is on. If you do, information that you entered in its built-in book, and in an installed book card, will be erased.

1.Turn BOOKMAN off.2.Turn BOOKMAN over.3.Align the tabs on the book card with the notches in the slot.

You can turn off BOOKMAN at any screen. When you turn BOOKMAN on again, the screen that you last viewed appears.

➤About Screen Illustrations

Some screen illustrations in this User’s Guide may differ from what you see on screen. This does not mean that your BOOKMAN is malfunctioning.

4.Press the book card down until it snaps into place.➤Removing Book Cards

Warning: When you remove a book card to install another, information that you entered into the removed book card will be

21erased.