Installing Batteries

 

Installing a Book Card

 

 

 

Note: If battery insulation tape is in- stalled, carefully remove it by pulling the battery installation tape out of the battery compartment.

BOOKMAN 440 models use two CR2032 3-volt batteries. Here is how to install or replace the batteries.

Warning: When the batteries lose power or are removed from your BOOKMAN, information that you entered in its built-in book, and in an installed book card, will be erased.

1.Turn your BOOKMAN over.2.Slide off its battery cover in the direction of the triangle.3.Install the batteries with their plus signs facing you.4.Replace the battery cover.➤Follow the Arrows

The flashing arrows on the right of the screen show which arrow keys you can press to move around the screen.

Warning: Never install or remove a book card while your BOOKMAN is turned on. If you do, information that you have entered in the built-in book, as well as in any other installed book cards, may be erased.

1.Turn your BOOKMAN off.2.Turn your BOOKMAN over.3.Align the tabs of the book card with the notches in the slot.4.Press the book card down until it snaps into place.➤Removing Book Cards

Warning: When you remove a book card to install another, information that you entered in the removed book card may be erased.

4