Sending a Word Between Books Resetting Your BOOKMAN

You can look up words from this book in certain other BOOKMAN books, and vice versa.

To send or receive a word to or from another book, you must have installed a book card in your BOOKMAN that is able to send or receive words, as well. To learn if a book card can send or receive words, read its User’s Guide.

1.Highlight a word in the text of an article.

To highlight a word in text, press

ENTER and then press the arrow keys.

2.Hold ✩ and press CARD .3.Highlight the other book.

4.Press ENTER .

The word that you highlighted ap- pears in the other book.

5.If needed, press ENTER to look up the word.

If the BOOKMAN keyboard fails to re- spond, or if its screen performs errati- cally, first press CLEAR and then press ON/OFF twice. If nothing happens, follow the steps below.

Warning: Pressing the reset button with more than very light pressure may permanently disable your BOOKMAN. In addi- tion, resetting BOOKMAN erases settings and information entered into its built-in book and in any installed book card.

1.Hold CLEAR and press ON/OFF . If nothing happens, try Step 2.

2.Use a paper clip to gently press reset button on BOOKMAN. The reset button is recessed in a pin-sized hole on the back of the BOOKMAN. Look for it on the bat- tery cover or near the book card slot.

This unit may change operating modes due to Electro-static Discharge. Normal operation of this unit can be re-established by pressing the reset key, ON/OFF , or by removing/replacing batteries.

14