Digital Book System
Installing & Removing Digital Books
To install a digital book, first turn off your Digital Book System. Then align the digital book’s tabs with the notches in either book slot on the back and snap the book into the slot. If you install only one book, it doesn’t matter which slot you use. But make sure that the book’s metal contacts are facing down.
To remove a book, first turn off the Digital Book System. Then compress the book’s tab and lift the book from the slot.
Restarting the Digital Book System
If the keyboard fails to respond or the screen performs erratically, first press CLEAR and then press ON/OFF . If nothing happens, hold CLEAR and press ON/OFF . If nothing happens still, press the recessed reset button on the back of your Digital Book System using a paper clip.
If you install or remove digital books when the Digital Book System is on, or
when you reset the Digital Book System, you may erase information that you entered in the installed digital books.
26