Digital Book System

Replacing the Batteries

Your unit uses CR2032 lithium batteries. Before replacing them, have four new batteries ready.

1.Turn your Digital Book System off.2.Remove the battery cover on the back. Then remove all batteries.

3.Promptly slide two new batteries into the battery cavity with the metal clip over it.

Don't bend the clip; ’sit an electrical contact. And make sure the batteries’ plus (+) signs face up.

4.Slide two new batteries into the other cavity. Then replace the battery cover.

To prevent deleting information from installed digital books and the notepad:

Always replace the batteries before they lose all power, and never remove the batteries while the Digital Book System is on.

Never mix old and new batteries. And, once batteries have been removed, install new ones within two minutes.

31