Franklin SCQ-200 Using a Password, ✓About Automatic Shutoff

Using a Password

You can use a password to keep the information in your phone list private. Your password will be requested whenever anyone turns on the unit and first presses PHONE .

Warning! After you have set the password, you will not be able to see or use your phone list without it. So always record your password and keep it in a separate place.

1.Press PHONE .

2.Use to see Set the password and then press ENTER .

3. Type a password and then press ENTER .

Remember to write down your exact password and keep it in a separate place. Your password can have up to 23 characters.

4. To test the password, press ON/OFF , type the pass- word, and then press ENTER to gain access.

5.To disable the password, repeat Steps 1 and 2 above, and then press ENTER when

Enter password appears.

✓About Automatic Shutoff

If you forget to turn off this product, it will automatically turn off in about two minutes. When you turn it on again, operation resumes with your current settings.

11