Installing Batteries

 

Installing Book Cards

 

 

 

The BOOKMAN 440 model uses two CR-2032 lithium batteries. Here is how to install or replace them.

Warning: When the batteries lose power or are removed from BOOK- MAN, information that you have entered in its built-in book as well as in any installed book card will be erased.

1.Turn BOOKMAN over.2.Slide off its battery cover in the direction of the triangle.3.Install the batteries following the diagram in the case4.Replace the battery cover.Resuming Where You Left Off

You can turn off BOOKMAN at any time. When you turn BOOKMAN on again, the screen that you last viewed appears.

Warning: Never install or remove a book card when your BOOKMAN is on. If you do, information that you entered in its builtin book as well as in the book card will be erased.

1.Turn BOOKMAN off.2.Turn BOOKMAN over.3.Align the tabs of the book card with the notches in the slot.4.Press the book card down until it snaps into place.Removing Cards

Warning: When you remove a BOOKMAN card to install another, information that you entered in the removed card is erased.

4