Franklin Industries, L.L.C FCW100 Installation, Electrical Connection, Use of Extension Cords

Installation

The FWC100 Wine Cellar is designed to be either free-standing or built-in. It has a fan at the bottom of the unit to direct compressor-generated heat away from the compressor and through the front of the unit. There must be a minimum of 3” of space around both sides and the back of the appliance and the airflow from the vents at the front of the system must be unimpeded.

Once the unit is positioned, the leveling leg should be turned to level the Wine Cellar.

Electrical Connection

Important! For your personal safety, this appliance must be properly grounded. In the event of an electrical short circuit, grounding reduces the risk of shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be inserted into an outlet that is properly grounded and installed. Consult a qualified electrician if you do not completely understand the grounding instructions.

DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.

Use of Extension Cords

Avoid the use of an extension cord because of potential safety hazards under certain condi- tions. If it is necessary to use an extension cord, be sure to use only a 3-wire extension cord that has a 3-blade grounding plug. Use a 3-slot outlet that will accept the plug. The marked rating of the extension cord must be equal or greater than the electrical rating of the appliance.

4