FARGO electronic M10, C10 service manual Installing the 32-Bit Print Spooler for Windows 95/98

RESTRICTED USE ONLY Fargo Electronics, Inc.

Installing the 32-Bit Print Spooler for Windows 95/98 (continued)

When the 32-Bit Print Spooler is running, its icon will appear in the Windows Task Bar. During a print job, it is sometimes helpful to click on this icon to bring the 32-Bit Print Spooler status window to the foreground of the application. This window provides a number of details about the print jobs being sent to the Printer.

Term	Description
Current Job	The Current Job tab tells you the name and size of the file printing, the
tab	progress of the overall print job, as well as the total number of copies
	left to print.
	It also provides buttons which allow you to pause or cancel the print job
	at any time during the printing process.
Settings tab	The Settings tab tells you the port and Printer to which you are printing
	and allows you to configure the timeout settings. In most instances,
	these settings will rarely need to be changed.
	This tab also provides two other options called Save last job for
	reprint and Direct to Port Mode.
Save last job	When the Save last job for reprint option is selected, the 32-Bit Print
for reprint	Spooler will automatically save the last print job you sent to the Printer
option	and allow you to instantly reprint the job without the delay of having to
	reprocess it.
	The print job will be saved in the spooler until another print job is sent
	and saved over it. If you do not wish to save the last print job for reprint,
	deselect this option.
	To print a saved job, simply select the Print button from the spooler’s
	Current Job tab.
Direct to Port	The Direct to Port Mode option is selected by default. In most
Mode option	instances, this option allows the spooler to send data to the Printer at
	its optimum speed. If, however, you experience problems when printing
	with this option selected, simply deselect it and try the print job again.
Job Queue tab	The Job Queue tab appears only when a print job is being sent to the
	Printer. This tab tells you the name and status of each job in the queue
	and shows you the order in which the jobs will print if you have sent
	multiple jobs to the Printer. A control button is also provided which
	allows you to delete every job listed in the queue.
	To delete the job currently being printed, simply select the Cancel Print
	button under the Current Job tab.

Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) 24