RESTRICTED USE ONLY | Fargo Electronics, Inc. |
Selecting the Verify Magnetic Encoding option
Use this option to verify the encoding settings.
Step Procedure
1Select this option to instruct the Printer to verify that all magnetic data has been correctly encoded on each card. (Note: This option is selecTable for both ISO and JIS II encoding modes.)
•If this option is selected, any verify errors will cause the Printer to signal an error condition.
•If this option is not selected, the verify pass will not be executed.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) | 79 |
|
