FARGO electronic C10, M10 service manual Rgb

RESTRICTED USE ONLYFargo Electronics, Inc.

Reviewing the Glossary of Terms (continued)

Term	Definition
Resolution	The number of individual pixels in a graphic, taken over a given
	length, used to indicate the sharpness of the picture and the level
	of detail. The number of elements in the printhead determines
	Fargo Printer resolution.
RFI (Radio	Electromagnetic waves radiated by poorly shielded cables or
Frequency	electronic devices that interferes with the operation or data
Interference)	transfer of another device.
RFID (Radio	Indicates a way of transmitting information via radio frequency.
Frequency	Data is sent from an RFID transceiver to an RFID tag that is
Identification)	embedded in a Resin Ribbon.
RGB	The three primary colors of the luminance, or additive, model.
(Red/Green/Blue)	Combinations of these three colors can produce practically all the
	colors of the spectrum that humans can detect. Computer
	monitors operate on an RGB model.
Ribbon	The dye impregnated film that is used for color printing.
Ribbon cable	Parallel wires held flat in a row by plastic insulation.
RibbonTraq	A Fargo Electronics method of placing bar code-like marks on the
	transition area between color panels. These marks are arranged
	for detection by a reflective Sensor array for the identification of
	ribbon type and the ribbon position.
RMA number (Return	A number, acquired from Fargo Support, which authorizes the
Merchandise	return of merchandise for repair or credit.
Authorization
number)
Roller	Elements of the Printer used for the transport of media consisting
	of a rotating steel shaft (for ribbon) or a rotating steel shaft with a
	rubber cylinder installed at the shaft midpoint (for moving cards).
	Continued on the next page

Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) 169