FARGO electronic M10, C10 service manual Replacing the Cleaning Roller Assembly

RESTRICTED USE ONLY Fargo Electronics, Inc.

Replacing the Cleaning Roller Assembly (830177)

Refer To Drawing 830177.

TTR: 1 minute.

Step Procedure

1Unplug the power cord from the printer.

2Lift the Head Latch Lever (830312, drawing 830119-XX) and raise the Upper Imaging Assembly.

3Locate the Cleaning Roller Assembly in the Card Feed Path beneath the Lower Ribbon Sensor Assembly (drawing 830126). The Cleaning Roller Assembly is held in place by two magnetic catches (130200, drawing 830131).

4Grasp the front corner of the Cleaning Roller Assembly and lift it from the printer.

Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) 124