Loading Ribbon Into The Printer | FARGO electronic C10, M10 guide

RESTRICTED USE ONLYFargo Electronics, Inc.

Loading Ribbon Into The Printer (continued)

Step Procedure

5a. Place the supply end of the Ribbon in between the two black Ribbon Drive Hubs located on the right-hand side of the Printer’s interior.

b.Make certain that the Ribbon is fed from underneath the Ribbon roll. Hint: The Ribbon Drive Hub nearest you, as you are looking into the Printer from the front, is spring loaded.

c.Use the end of the ribbon supply core to push in this Ribbon Drive Hub when inserting the ribbon.

Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)	29

Image 29

FARGO electronic C10, M10 service manual Loading Ribbon Into The Printer