RESTRICTED USE ONLYFargo Electronics, Inc.
Applying Power (continued)
Step Procedure
2Plug the DC power plug end of the transformer cord into the Power Input Port on the rear panel of the Printer. (Note: Optional external transformer must be a Listed Class 2 device with an output rating of 16.5 volts and 3.5 amps AC (alternating current).
The alternating current should be between 50 and 60 Hz.)
3Plug the AC power plug end of the transformer cord into an available wall outlet. (Note: The wall outlet should be located near the Printer and should be easily accessible.)
Power is automatically applied to the Printer when it is plugged in. Press the On/Cancel button if you wish to turn the Printer OFF.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) | 35 |
|
