FARGO electronic M10, C10 service manual Using the Magnetic Encoding Options

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Magnetic Encoding Options

Use this option only if the Printer has an optional Magnetic Stripe Encoding Module installed. (Note: This section describes these options and the Printer's Magnetic Encoding process.)

Step Procedure

1Select the Magnetic Encoding Options to change the encoding mode, coercivity setting, or to modify the ISO Standards for Tracks 1, 2 and 3. (Note: By default, the Printer Driver is set to encode according to ISO Standards onto high-coercivity Magnetic Stripes.)

Continued on the next page

Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) 70