FARGO electronic M10, C10 service manual Printing a Self Test

RESTRICTED USE ONLY Fargo Electronics, Inc.

Printing a Self Test

Now that Ribbon and cards are installed, a self test should be performed to check for proper operation of the Printer. The standard self test function requires only that a full-color Ribbon and at least one card is installed. A sample of the self test pattern is shown below.

Step Procedure

1• If power is ON, turn it OFF now by pressing the On/Cancel button. (Note: The LED indicator lights should no longer be illuminated.)

•Verify that a full-color Ribbon is installed and that cards are properly loaded.

2Press and hold the on-line button.

3While holding the on-line button down, turn the Printer power back ON by quickly pressing and releasing the On/Cancel button.

4Release the on-line button. (Note: The gray scale self test pattern will begin printing approximately 10 seconds after the on-line button is released.)

Self Test Example: (Actual size)

Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) 36