FARGO electronic C10, M10 service manual Making Mechanical Adjustments to the Printhead

RESTRICTED USE ONLY Fargo Electronics, Inc.

Making Mechanical Adjustments to the Printhead (continued)

Caution: In order for the printer to function properly with the new Printhead Assembly, you MUST have firmware version 1.0.7. The firmware version of the printer is shown on the edge of the Self Test print.

Contact FARGO Technical Support for a firmware update at (952) 941-0050 or FAX (952) 941-1852.

Note: Be sure to record the total number of passes the printer has made to date. This is necessary for warranty purposes in order to accurately count the total number of passes made by each new printhead. To have the printer report the total number of passes made to date, press and hold the on-line button for 12 seconds. A card will be printed showing this number. Store this card in a safe place so you can accurately determine the pass count of the printhead if the need arises.

Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) 99